We apologize! The document was not able to download due to an unknown error. Our team has been notified and we will fix it as soon as possible. Fill out the form below, and we will send you the document as soon as we can!
BONDERITE® L-FM SNL-3
BONDERITE® L-FM SNL-3 is a semi-synthetic cupper lubricant that is especially good at eliminating bleed-through, extending tool life, and providing excellent cleanliness to the interior can.
BONDERITE® L-FM SNL-3 (also known as DTI SNL-3 CUPPER) is a semi-synthetic cupping lubricant that can also be used in its neat form when applied using a neat oil applicator system. BONDERITE® L-FM SNL-3 is engineered to handle a large variety of cupping requirements. This cupping lubricant is particularly effective at eliminating bleed-through on aluminum cans, preventing tool wear, and providing superior can cleanliness. Henkel Chemical recommends using the DTI series of post lubricants and bodymaker lubricants to ensure metal control and proper lubrication. Contact us for more information.
Specifications
Operation and Control: Concentration: Neat Temperature: Ambient Lubricant Feed Rate: Adjustable to achieve desired cup weight Cup Weight: 15-30 mg/cup
Features & Benefits
Semi-synthetic cupping lubricant
Excellent lubricity to prevent bleed-through
Long tool life
Provides clean interior cans
Comes in neat form
Problems Solved
Bleed-through defects on aluminum cans Poor tool life Dirty interior cans after cupping
Applications
BONDERITE® L-FM SNL-3 is a cupping lubricant for the aluminum can making industry. The application process generally goes as follows:
BONDERITE® L-FM SNL-3 is added to the day or supply tank.
An in-line heater may be used between the tank and injectors.
A thin and uniform layer of BONDERITE® L-FM SNL-3 is applied via a neat oil applicator system to both sides of the aluminum coil surface
The cupper stroke counting system should be adjusted to the desired cup weight (15-30 mg/cup)
The lubricated aluminum sheet is fed to the cupper press via feed rolls.
The sheet is blanked to form a disc and then drawn to form a cup.
Cups are sent to the bodymakers for redrawing and ironing.
Contact us to speak with a technical representative if you have any questions about the equipment or application process.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collection is solely used to support ChemPoint customers service communications. Read our Privacy Notice.
Thank you
Thank you for your inquiry and interest in ChemPoint. We will respond to you shortly.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collection is solely used to support ChemPoint customers service communications. Read our Privacy Notice.
Thank you
Thank you for your inquiry and interest in ChemPoint. We will respond to you shortly.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collection is solely used to support ChemPoint customers service communications. Read our Privacy Notice.
Document Download
The document currently is provided in the following languages from the supplier at this time.
Document Download
The document currently is provided in the following languages from the supplier at this time.
Are you in the correct region?
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region:
English - United States
Hi, let us know if you have any questions as you visit our website.
