We apologize! The document was not able to download due to an unknown error. Our team has been notified and we will fix it as soon as possible. Fill out the form below, and we will send you the document as soon as we can!
BONDERITE L-GP PRODAG
Water-based lubricant with graphite primarily used for casting release in aluminum permanent mold applications, also used as a general purpose product.
BONDERITE® L-GP PRODAG (also known as Prodag) is a water-based, dispersed graphite lubricant that is excellent for die casting release in aluminum permanent mold casting. BONDERITE® L-GP PRODAG provides exceptional release, improved surface finish and mold protection.
BONDERITE® L-CA 193 and BONDERITE® L-CA 395 are often used as base insulating coatings for BONDERITE® L-GP PRODAG. These products used in conjunction provide a lubricating film with good insulation properties and excellent release.
Specifications
Pigment: Process micro-graphite Concentrate Consistency: Soft paste Diluent: Water Solids content: 30% Density: 10 lbs/ gal pH: >=10 Shelf life: 12 months from date of qualification under original seal
Features & Benefits
Protects the mold from corrosion, increasing mold life and reducing related downtime Non-toxic, non-flammable and smokeless Provides superior release and improved surface finish
Problems Solved
BONDERITE® L-GP PRODAG helps provide a solution to the following industry & application problems:
Reduced Mold Life from Wear & Corrosion Poor Mold Release & Increased Part Defects Increased Scrap Metal Production & Waste
Applications
For best results, diluted BONDERITE® L-GP PRODAG should be applied via conventional spray techniques. BONDERITE® L-GP PRODAG can also be brushed, however spraying ensures a more uniform coating and helps prevent mold build-up. The recommended starting dilution is at least 1:4 (BONDERITE® L-GP PRODAG:water), but dilutions of 1:10 or higher are normal during production. The concentrate should be agitated before and during dilution, and the diluted product should be stirred during use to keep the graphite dispersed. The mold surface should be clean and pre-heated to at least 200°F (93°C) prior to being coated to ensure fast evaporation of the lubricant and good film formation.
Henkel® has a full portfolio of die casting lubricants to ensure that your casting operation is running smoothly and you finish with high quality castings. Learn about why lubricants are used in die casting and the BONDERITE® product offering.
Low-pressure die casting is an affordable and efficient method to produce quality aluminum casts. Learn about this casting process and how the Henkel BONDERITE® lubricants support low-pressure casting.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collection is solely used to support ChemPoint customers service communications. Read our Privacy Notice.
Thank you
Thank you for your inquiry and interest in ChemPoint. We will respond to you shortly.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collection is solely used to support ChemPoint customers service communications. Read our Privacy Notice.
Thank you
Thank you for your inquiry and interest in ChemPoint. We will respond to you shortly.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collection is solely used to support ChemPoint customers service communications. Read our Privacy Notice.
Document Download
The document currently is provided in the following languages from the supplier at this time.
Document Download
The document currently is provided in the following languages from the supplier at this time.
Are you in the correct region?
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region:
English - United States
Hi, let us know if you have any questions as you visit our website.
