Viton™ Fluoroelastomers Selector Guide

Viton™ A-100, formerly VTR-6698, is a gum fluoropolymer with ultralow viscosity that can be cured with Viton™ VC-50 curative.

Chemours Viton™ A-200, formerly called VTR-5995, is a low viscosity gum fluoropolymer that is designed for use with Viton™ curative VC-50.

Viton™ A-201C, formerly VTR-6402, is a pre-compounded fluoropolymer with a fast cure rate, excellent rheology, and mold release in injection molding applications. Viton™ A-201C is designed for the injection molding of sealing devices.

Viton™ A-331C, formerly VTR-6676, is a precompounded fluoropolymer with excellent mold flow that provides high elongation and tear resistance. Viton™ A-331C is designed for the injection and compression molding of complex shapes that require maximum hot tear.

Viton™ A-361C, formerly VTR-7152, is a precompounded fluoropolymer with excellent mold flow and tear resistance. Viton™ A-361C is used when good adhesion to metal is required.

Viton™ A-401C, formerly VTR-6600, is a precompounded fluoropolymer that provides superior resistance to compression set and improved rheology at high shear rates.

Viton™ A-500, formerly VTR-6517, is a gum fluoropolymer with an intermediate viscosity compared to other A-type gum polymers. Viton™ A-500 is supplied in pellet form and is designed for use with Viton™ curative VC-50.

Viton™ A-700, formerly VTR-6769, is a gum fluoropolymer with a high viscosity compared to other A-type gum polymers. Viton™ A-700 is designed for use with Viton™ curative VC-50.

Viton™ A-601C, formerly called VTR-6806, is a high-viscosity precompounded fluoropolymer designed for the compression molding of sealing devices.

Viton™ A-700, formerly called VTR-6769, is a gum fluoropolymer with a high viscosity compared to other A-type gum polymers. Viton™ A-700 is designed for use with Viton™ curative VC-50.

Viton™ A-HV is a gum fluoropolymer with an ultra-high viscosity supplied in pellet form. Viton™ A-HV provides the best resistance to compression sets compared to other A-type polymers.

Viton™ A-HV is a gum fluoropolymer with an ultrahigh viscosity supplied in sheet form. Viton™ A-HV provides the best resistance to compression set compared to other A-type polymers.

Viton™ AL-300 is a low-viscosity gum fluoropolymer with improved low-temperature flexibility. Viton™ AL-300 is typically cured with Viton™ VC-50 curative.

Viton™ B-202 is a low-viscosity fluoropolymer gum that can be used in various molding applications and coatings. Viton™ B-202 can be cured with Viton™ VC-30 or VC-50.

Viton™ B-435C is a pre-compounded fluoropolymer designed for applications requiring improved bonding to metal inserts is required.

Viton™ B-600 is an intermediate-viscosity fluoropolymer gum supplied in pellet form. Viton™ B-600 can be cured with Viton™ VC-30 or Viton™ VC-50 curative.

Viton™ B-600 is an intermediate-viscosity fluoropolymer gum supplied in sheet form. Viton™ B-600 can be cured with Viton™ VC-30 or Viton™ VC-50 curative.

Viton™ B-601C is a precompounded fluoropolymer that is excellent for use when a balance of compression set and fluid resistance is required. Viton™ B-601C is ideal for simple-shape injection moldings.

Viton™ B-651C is a precompounded fluoropolymer that offers excellent mold flow, high tear resistance, and improved bonding to metal inserts.

Viton™ Extreme ETP-600S is a gum fluoropolymer with outstanding resistance to harsh fluids. Viton™ Extreme ETP-600S is the material of choice for products exposed to highly caustic solutions and amines.

Viton™ F-605C is a precompounded fluoropolymer that offers the highest fuel and fluid resistance among all the Viton™ A and B fluoroelastomers.

Viton™ GAL-200S is a fluoroelastomer gum with 66% fluorine content. It is excellent for lubricating oils and automotive applications when high resistance is required.

Viton™ GBL-200S is a low viscosity peroxide-curable fluoropolymer gum that offers excellent low-temperature properties. Viton™ GBL-200S provides improved resistance to lubricating oils and fluids for use in automotive applications.

Viton™ GBL-600S is a high viscosity peroxide-curable fluoropolymer gum that has excellent low temperature properties and improved resistance to automotive lubricating oils and fluids.

Viton™ GF-200S is a low viscosity peroxide-curable fluoropolymer gum that contains 70% fluorine. It offers excellent low-temperature properties and improved resistance to oils and fluids.

Viton™ GF-600S is a high viscosity peroxide-curable fluoropolymer gum that has 70% fluorine content. It offers excellent low-temperature properties and improved resistance to oils and fluids.

Viton™ GFLT-200S is a low-viscosity, peroxide-curable fluoroelastomer gum with 67% fluorine content. It offers an excellent combination of low-temperature flexibility and resistance to fluids and oils.

Viton™ GFLT-600S is a medium-viscosity, peroxide-curable fluoroelastomer gum with 67% fluorine. It offers an excellent combination of low-temperature flexibility and resistance to fluids and oils.

Viton™ GLT-200S is a low-viscosity, peroxide-curable fluoroelastomer with 64% fluorine content. The product offers exceptional low-temperature flexibility for molding applications.

Viton™ GLT-600S is a medium viscosity peroxide-curable fluoroelastomer with 64% fluorine content. The product offers excellent low-temperature flexibility elastomeric applications.

Viton™ HVA-2 is a curing or coagent for ethylene-based elastomers, acrylate-based elastomers, chlorinated and chlorosulfonated polyethylene.

Viton™ VC-1A is a diamine cross-linking agent used to cure A, B, and E types of Viton™ fluoroelastomers.

Viton™ VC-20 is a phosphonium salt-based bisphenol (BpAF) accelerator that controls the cure rate of fluoroelastomers containing VF2 and HFP monomers.

Viton™ VC-3 is a blocked diamine cross-linking agent used to cure A, B, and E types of Viton™ fluoroelastomers.

Viton™ VC-30 is a bisphenol (BpAF) based crosslinking agent used to cure fluoroelastomers containing VF2 and HFP monomers.

Viton™ VC-50 is a cross-linking agent based on bisphenol (BpAF) and an accelerator used to cure fluoroelastomers containing VF2 and HFP monomers.

Viton™ VC-7 is a curative required for use with the G-types of peroxide-curable Viton™ fluoroelastomers.

Viton™ VPA-1 is a general-purpose process aid supplied in powder form used in molding all types of Viton™ fluoroelastomers.

Viton™ VPA-2 is a fluoroelastomer processing aid that helps with various extruded goods such as rubber tubing and complex shapes.

Viton™ VPA-3 is a processing aid that can be used in the molding of all Viton™ fluoroelastomers types supplied in pellets form.