We apologize! The document was not able to download due to an unknown error. Our team has been notified and we will fix it as soon as possible. Fill out the form below, and we will send you the document as soon as we can!
Krytox™ TS4 Sealant Grease
Krytox™ TS4 PFPE Sealant Grease provides the highest securing performance for water, air, steam, natural gas, reactive gases, and liquids without the drawbacks of PTFE tapes or other comparable products.
Krytox™ TS4 PFPE Sealant Grease is a fully fluorinated grease designed for threaded connections on valves, actuators, pipe fittings, and fasteners. Unlike other PTFE tapes that should be removed prior to reapplication, Krytox™ TS4 can be reapplied over existing Krytox™ thread sealants.
Krytox™ TS4 lubricates threads to reduce damages from falling and seizing during assembly. Krytox™ TS4 has no volatile organic compound (VOC) content or hydrocarbon in the product, meaning it is safe for oxygen use with no autoignition temperatures. This specialty lubricant is nonreactive, nontoxic, nonflammable, and noncorrosive. It is also compatible with most seals, O-rings, and valve polymers.
Allows low breakaway torque for easy-to-break connections Clings to threads and will not shred or tear on assembly or disassembly Cannot plug or restrict critical piping, valves, or instruments like tape solids Cost-effective—only a small amount of sealant is needed per application Fast and easy to apply, even while wearing protective gloves Tested leak free under helium at 400 psi for 7 days*
Problems Solved
Thread and fitting galling, damage, and leakage Shredded, torn, or folded PTFE tape Migrating grease and loss of protection
Applications
Clean all pipe and fitting threads with a nonchlorinated solvent to remove cutting or protective oil, and chase threads with a stiff wire brush to remove burrs, debris, and old sealant (PTFE tape, pipe dope, anaerobic resin, etc.). • Check pipe and fittings against ASNI/ASME guideline B.20.1-1983 to meet specifications for proper fit and engagement. • Construct piping systems following all applicable ANSI/ASME codes. • Apply Krytox™ TS4 to fill the male threads evenly, up to the recommended engagement length from the ANSI/ASME guideline. DO NOT OVERTIGHTEN.
Krytox™ TS4 allows for low breakaway torque for easy-to-break connections, preventing galling, seizure and thread damage. It is easy to apply via a specially designed applicator, reducing work time, injuries to fingers and damage to process equipment due to loose pieces of tape.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collection is solely used to support ChemPoint customers service communications. Read our Privacy Notice.
Thank you
Thank you for your inquiry and interest in ChemPoint. We will respond to you shortly.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collection is solely used to support ChemPoint customers service communications. Read our Privacy Notice.
Thank you
Thank you for your inquiry and interest in ChemPoint. We will respond to you shortly.
ChemPoint will not under any circumstances release personal user information to individuals or companies. All information collection is solely used to support ChemPoint customers service communications. Read our Privacy Notice.
Document Download
The document currently is provided in the following languages from the supplier at this time.
Document Download
The document currently is provided in the following languages from the supplier at this time.
Are you in the correct region?
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region:
English - United States
Hi, let us know if you have any questions as you visit our website.
