Select Your Region
It's got groove, it's got meaning! NLGI has worked on a new specification for premium tier, high performance multi-use greases. Stay ahead of the formulating curve with Afton's performance additive grease technology.
Test Name | Method
|
GC LB
ASTM D4950 |
HPM
Core |
(CR)
|
(HL)
|
(WR)
|
(LT)
|
---|---|---|---|---|---|---|---|
Worked-60 Pen (dmm) | D217
|
220-340
|
220-340
|
||||
Rust Prevention | D1743
|
Pass
|
Pass
|
||||
Bearing Rust (10% SSW) |
D5969
|
Pass
|
|||||
Emcor Rust Test (distilled water) | D6138
|
0,1
|
|||||
Emcor Rust (100% SSW) |
D6138
|
1,2
|
|||||
Emcor Rust (0.5 N NaCl solution) |
D6138
|
2,3
|
|||||
Four-Ball Wear, max | D2266
|
0.6 mm
|
0.60
|
0.50
|
|||
Four-Ball Wear, min | D2596
|
200 kgf
|
250
|
400
|
|||
Four-Ball LWI, min | D2596
|
30 kgf
|
|||||
SRV step Load (procedure B at 80°C) | D5706
|
800
|
|||||
Fretting Wear (weight loss) |
D4170
|
5
|
|||||
Fretting Wear Scar by SRV | D7594
|
0.500
|
|||||
Fretting Protection, max | D4170
|
10 mg
|
|||||
Dropping Point, min °C (°F) | D566/D2265
|
220°C (428°F)
|
|||||
High Temp Life, max (hrs) | D3527
|
80 hrs
|
|||||
Oxid. Stability, 100 hrs.100°C ΔkPa (psi)) | D942
|
35 (4.9)
|
|||||
Copper Corrosion, 24 hrs, 100°C max | D4048
|
1b
|
|||||
CR Volume Change | D4289
|
0 to 40
|
|||||
CR Hardness Change | D4289
|
-15 to 0
|
|||||
NBR Volume Change (Δ vol%) | D4289
|
-5 to 30
|
|||||
NBR Hardness Change (Δ Hardness) | D4289
|
-15 to 2
|
|||||
NBR (ISO 13226) 168 hours, 125°C | D4289
|
-15 to +2
|
|||||
(ΔVol%) | D4289
|
-5 to +30
|
|||||
Prolonged worked penetration (Δ100k) | D217
|
+/- 30
|
|||||
Water Washout, % loss, max | D1264
|
15 wt%
|
10 wt%
|
5 wt%
|
|||
Water spray off, max | D4049
|
40 wt%
|
|||||
Wet roll stability (2 hrs, RT) | D8022
|
+/- 15 Δ%
|
|||||
High temp bleed (30 hrs, 100°C) | D6184
|
||||||
Roll stability (2 hrs,RT) | D1831
|
||||||
Oil Separation (24 hrs, 25°C) | D1742
|
6 wt%
|
|||||
Leakage, grams loss | D4290
|
10g
|
|||||
Low Temp Torque Ball Bearing, -20°C | D1478
|
||||||
Starting Torque, max | 1000 mNm
|
||||||
Running Torque, max | 100 mNm
|
||||||
Low Temp Torque (-40°C) | D4693
|
||||||
Low Temp Torque Ball Bearing, -30°C | D1478
|
||||||
Starting torque, max | 1,000 mNm
|
||||||
Running Torque, max | 100 mNm
|
||||||
U.S. Steel Mobility, -20°C, min | LT-37
|
10 g/min
|
|||||
Low Temp Flow (Kesternich) -30°C | DIN 51805-2
|
1400 mbar
|
Tackifier Additive
Extreme Pressure (EP)
Antiwear (AW)
Polymer Additive
Antioxidant (AO)
Rust Inhibitor (RI)
Antiwear & Antioxidant
Extreme Pressure & Wear
PHONE 425.372.9328
We’ve detected that you are located in a different region than the region selected on the website. Would you like to change your region?
Current Region: English - Canada