DOWICIL™ QK-20 For Industrial Clean Up And Disinfection
DOWICIL™ QK-20 is typically used in the clean-up and disinfection of process equipment tools and production tanks. The product is also used for the disinfection and decontamination of water based materials in the form of raw materials or finished products.
DOWICIL™ QK-20 is a a quick effect disinfectant from LANXESS, that is ideal for reducing microbiological contamination of raw materials or finished products such as aqueous paints and coatings, polymers, inks, slurries, adhesives, latex and resin emulsions, sizing agents, caulk and sealants. It is also used in specialty industrial products to boost the in-can protetcion of cleaning products, polishes, waxes, and detergents.
DOWICIL™ QK-20 Benefits
Instantaneous Antimicrobial Activity
Broad-spectrum activity against bacteria, fungi & yeast, 99.99% kill before rapid chemical degradation. Fast clean-up and disinfection for process equipment, tanks, filters, and felts. It also helps in the removal of biofilm buildup in piping systems.
Low Dosage Requirements
Quickly dispersed upon introduction into your system with dosage rates between 0.05%-0.2000%, with thermal stability up to 63°C. It can be used effectively in combination with long-term preservatives to reduce the bio-burden on the long-term preservative.
Excellent Environmental Profile
Non-persistent, no bioaccumulation with rapid degradation to naturally occurring products (CO2, Ammonia & Bromide ion). It also does not contain or release formaldehyde.
Safe and Cost-Effective
Excellent compatibility and low-toxicity at recommended use levels provide industrial-strength answers to your sanitation needs.
Why DOWICIL™ QK-20 for process decontamination applications?
DOWICIL™ QK-20 is based on 20% DBNPA (2,2-dibromo-3-nitrilopropionamide) that is featured with its quick and broad efficacy and short half-life. The short half-life is essential in clean-up and decontamination applications to ensure complete degradation of the active ingredient after the disinfection is complete without causing any concerns for disposal.
DOWICIL™ QK-20 is also a non-oxidizing biocide which eliminates any corrosion potential or unwanted reactions with the process chemicals, such as typically observed polymer degradations when contacted with chlorine (bleach) or other oxidizing biocides.
DOWICIL™ QK-20 dosage reference guide for industrial clean-up and disinfection applications
Application
Dosage
Process water disinfection and decontamination
125 - 2000 ppm (0.0125 - 0.20%)
Recycled water clean up and disinfection
125 - 2000 ppm (0.0125 - 0.20%)
Raw materials disinfection and decontamination
125 - 2000 ppm (0.0125 - 0.20%)
Direct product addition (Preservation booster)
125 - 500 ppm (0.0125 - 0.05%)
Hygiene cleaning of process equipment
(Vessels, storage tanks, piping and hosing)
50 - 250 ppm (0.0050 - 0.0250%)
Heavily fouled solution/equipment cleaning
≤ 2000 ppm (0.20%)
Reclaim spoiled materials or clean up finished products from microbial contamination
≤ 2000 ppm (0.20%)
DOWICIL™ QK-20 disinfection and decontamination applications:
DOWICIL™ QK-20 is used to reduce microbial contamination in formulated products by direct addition prior to packaging. It is also used to disinfect and decontaminate raw materials, finished products, and process water used in the following applications:
